TOYOTA TUNDRA (XK50) 5.7L V8 32V VVT-I 375kW/504HP DENSO

ECU DENSO 275036-3560 · 510 CV (375 kW) · 5700 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA TUNDRA (XK50) 5.7L V8 32V VVT-I 375kW/504HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelTUNDRA (XK50)
Motor5.7L V8 32V VVT-I 375kW/504HP DENSO
Standaard vermogen510 CV / 375 kW
Cilinderinhoud5700 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-3560
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Lambda driver wish 2
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-YWF60- 1.51.0333YWF6000 DENSO 275036-3560
89663-YWF32- 1.51.0053YWF3200 DENSO 275036-3560
89663-YWF38- 1.51.0063YWF3800 DENSO 275036-3560
89663-YWF99 1.51.0063YWF9901 DENSO 275036-3560
89663-YWF81- 1.51.0123YWF8100 DENSO 275036-3560
89663-YWF60- 1.51.0073YWF6001 DENSO 275036-3560
89663-YWF87- 1.51.0063YWF8700 DENSO 275036-3560

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata