TOYOTA MARK X (X130) 2.5L V6 153kW/205HP DENSO

ECU DENSO 275922-3410 · 208 CV (153 kW) · 2500 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA MARK X (X130) 2.5L V6 153kW/205HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 4 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelMARK X (X130)
Motor2.5L V6 153kW/205HP DENSO
Standaard vermogen208 CV / 153 kW
Cilinderinhoud2500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275922-3410
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Electronic throttle control
  • Lambda correction f(IAT)
  • Lambda correction f(IAT) 2
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Lambda correction f(ECT) 4
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • Specific injection pressure
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-22331- 1.67.00732233100 DENSO 275922-3410
89663-22301- 1.67.00232230100 DENSO 275922-3410
89663-22430- 1.67.00332243000 DENSO 275922-3410
89663-22300-B 1.67.00832230000 DENSO 275922-3410

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop