TOYOTA LAND CRUISER PRADO (J150) 2.4L L4 16V D-4D 110kW/147HP DENSO

ECU DENSO D76F0219F1 · 149 CV (11 kW) · 2400 cc · Diesel sovralimentato

ECU-databaseTOYOTA › TOYOTA LAND CRUISER PRADO (J150) 2.4L L4 16V D-4D 110kW/147HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 3 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelLAND CRUISER PRADO (J150)
Motor2.4L L4 16V D-4D 110kW/147HP DENSO
Standaard vermogen149 CV / 11 kW
Cilinderinhoud2400 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDENSO
ModelD76F0219F1
Geheugen / EPROMMicro NEC D76F0219F1 - 2048Kbit - 200000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • EGR valve control
  • EGR valve control 2
  • Variable boost pressure 1
  • Variable boost pressure 2
  • Injection correction 2
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit 2
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • Torque limiter 2
  • Torque limiter
  • Speed limiter
  • Maximum possible engine charge
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Driver torque request
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-F0393- 1.67.0173F039300 DENSO D76F0219F1
89663-F0383- 1.67.0043F038300 DENSO D76F0219F1
89663-F0N43- 1.00.0143F0N4300 DENSO D76F0219F1

ECU-notities

Microprocessor D76F0219F1 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.