TOYOTA LAND CRUISER (J200) 4.6L V8 227kW/304HP DENSO

ECU DENSO 275036-5920 · 309 CV (227 kW) · 4600 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA LAND CRUISER (J200) 4.6L V8 227kW/304HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelLAND CRUISER (J200)
Motor4.6L V8 227kW/304HP DENSO
Standaard vermogen309 CV / 227 kW
Cilinderinhoud4600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-5920
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(IAT) 2
  • Lambda correction f(ECT)
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-60T90- 1.67.005360T9000 DENSO 275036-5920
89663-60L70- 1.67.019360L7000 DENSO 275036-5920
89663-60M01- 1.67.009360M0100 DENSO 275036-5920
89663-60E01- 1.67.028360E0100 DENSO 275036-5920
89663-60U00- 1.67.006360U0000 DENSO 275036-5920
89663-60M20- 1.67.011360M2000 DENSO 275036-5920
89663-60M00- 1.67.015360M0000 DENSO 275036-5920
89663-60G70- 1.67.012360G7000 DENSO 275036-5920
89663-60Y01- 1.67.004360Y0100 DENSO 275136-3080

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata