Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 5 firmwareversies
Voertuiggegevens
| Merk | TOYOTA |
| Model | HIACE (H200) |
| Motor | 2.5L 16V D-4D 65kW/88HP DENSO |
| Standaard vermogen | 88 CV / 65 kW |
| Cilinderinhoud | 2500 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | DENSO |
| Model | 175822-887 |
| Geheugen / EPROM | MICRO NEC 76F0040GD - 512 Kbit - 80000 |
Beschikbare tuning-opties:
- EGR valve control
- Injection correction 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Max injection limit 2
- Max injection limit for APS/BPS sensor
- Max injection limit - limp mode
- Injection correction
- Injection correction for IAT sensor
- J
- Torque limiter
- Maximum possible engine charge
- Maximum relative engine air charge
- Specific injection pressure limiter
- Specific injection pressure
- Air mass flow
- Driver torque request
Firmware-identificatoren (5)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 89663-26421- |
1.67.005 | 32642100 |
DENSO 175822-887 |
| — | 89663-26284- |
1.51.003 | 32628400 |
DENSO 175822-887 |
| — | 89663-26422- |
1.67.005 | 32642200 |
DENSO 175822-887 |
| — | 89663-26420- |
1.67.005 | 32642000 |
DENSO 175822-887 |
| — | 89663-26292- |
1.51.005 | 32629200 |
DENSO 175822-887 |
Technische voertuignotities
ECU located behind the glove compartment. Difficulty: medium.
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
