TOYOTA CROWN (S180) 2.5L V6 (GRS188) 145kW/194HP DENSO

ECU DENSO 275036-3410 · 197 CV (145 kW) · 2500 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA CROWN (S180) 2.5L V6 (GRS188) 145kW/194HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 14 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelCROWN (S180)
Motor2.5L V6 (GRS188) 145kW/194HP DENSO
Standaard vermogen197 CV / 145 kW
Cilinderinhoud2500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-3410
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 3
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (14)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-0N191- 1.51.00830N19100 DENSO 275036-3410
89663-0N190-A 1.51.00630N19000 DENSO 275036-3410
89663-0N193- 1.51.00630N19300 DENSO 275036-3410
89663-0N200- 1.51.00730N20000 DENSO 275036-3410
89663-0N120- 1.51.01230N12000 DENSO 275036-3410
89663-0N031- 1.67.00630N03100 DENSO 275036-8730
89663-30A42- 1.51.004330A4200 DENSO 275036-8730
89663-0N070- 1.67.00430N07000 DENSO 275036-8730
89663-0P022-A 1.67.00630P02200 DENSO 275036-8730
89663-0N033- 1.67.00730N03300 DENSO 275036-8730
89663-0N071-A 1.67.02230N07100 DENSO 275036-8730
89663-0N034-A 1.67.00830N03400 DENSO 275036-8730
89663-0P090- 1.67.00630P09000 DENSO 275036-8730
89663-0P081- 1.51.00430P08100 DENSO 275036-8730

ECU-notities

Microprocessor NEC 76F0038GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata