Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 7 firmwareversies
Voertuiggegevens
| Merk | TOYOTA |
| Model | C-HR |
| Motor | 1.8L 16V VVT-i HYBRID 72kW/96HP DENSO |
| Standaard vermogen | 98 CV / 72 kW |
| Cilinderinhoud | 1800 cc |
| Brandstof | Hybrid |
| Voertuigtype | Auto |
ECU
| Fabrikant | DENSO |
| Model | D76F0196F1 |
| Geheugen / EPROM | MIcro NEC D76F0196F1 - 1536 Kbit - 180000 |
Beschikbare tuning-opties:
- Base timing
- Base timing 2
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Spark advance correction - valve timing position 1
- Spark advance correction - valve timing position 2
- Electronic throttle control
- Electronic throttle control 2
- Lambda correction f(ECT)
- Advance limiter for component protection 1
- Lambda enrichment - open loop
- Lambda driver wish
- Speed limiter
- % relative air filling limit depending on IAT
- Driver torque request
- Exhaust gas temperature sensor
- Exhaust gas temperature sensor 2
- Throttle angle management
- Throttle angle management 2
- Variable valve timing - inlet
- Variable valve timing - outlet
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 89663-F4530- |
1.67.003 | 3F453000 |
DENSO D76F0196F1 |
| — | 89663-F4051- |
1.67.005 | 3F405100 |
DENSO D76F0196F1 |
| — | 89663-F4230- |
1.67.029 | 3F423000 |
DENSO D76F0196F1 |
| — | 89663-F4050- |
1.67.005 | 3F405000 |
DENSO D76F0196F1 |
| — | 89663-F4310- |
1.67.005 | 3F431000 |
DENSO D76F0196F1 |
| — | 89663-F4410- |
1.67.008 | 3F441000 |
DENSO D76F0196F1 |
| — | 89663-10132- |
1.67.008 | 31013200 |
DENSO D76F0196F1 |
Technische voertuignotities
2 ECUs located in the engine compartment to the right and left of the engine block, visible or hidden by a cover. Difficulty: easy
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
Microprocessor D76F0196F1 This Setting File can be used for serial system NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
