TOYOTA 4RUNNER (N280) 4.0L V6 24V Dual VVT-i 200kW/268HP DENSO

ECU DENSO 275036-5130 · 272 CV (2 kW) · 4000 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA 4RUNNER (N280) 4.0L V6 24V Dual VVT-i 200kW/268HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 22 firmwareversies

Voertuiggegevens

MerkTOYOTA
Model4RUNNER (N280)
Motor4.0L V6 24V Dual VVT-i 200kW/268HP DENSO
Standaard vermogen272 CV / 2 kW
Cilinderinhoud4000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-5130
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (22)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-35B41- 1.67.026335B4100 DENSO 275036-5130
89663-35E40- 1.67.015335E4000 DENSO 275036-5130
89663-35B61- 1.67.006335B6100 DENSO 275036-5130
89663-35B11- 1.67.007335B1100 DENSO 275036-5130
89663-35B60- 1.67.008335B6000 DENSO 275036-5130
89663-35G10- 1.67.005335G1000 DENSO 275036-5130
89663-35E41- 1.67.007335E4100 DENSO 275036-5130
89663-35E42- 1.67.005335E4200 DENSO 275036-5130
89663-35B20- 1.67.013335B2000 DENSO 275036-5130
89663-35F30- 1.67.007335F3000 DENSO 275036-5130
89663-35B21- 1.67.006335B2100 DENSO 275036-5130
89663-35801- 1.67.00833580100 DENSO 275036-5130
89663-35791- 1.51.00633579100 DENSO 275036-5920
89663-35F50- 1.51.004335F5000 DENSO 275036-5920
89663-35F70- 1.51.006335F7000 DENSO 275036-5920
89663-35781- 1.51.00833578100 DENSO 275036-5920
89663-35F41- 1.51.006335F4100 DENSO 275036-5920
89663-35D10- 1.51.014335D1000 DENSO 275036-5920
89663-35F51- 1.51.007335F5100 DENSO 275036-5920
89663-35D30- 1.51.007335D3000 DENSO 275036-5920
89663-35740-B 1.51.00833574000 DENSO 275036-5920
89663-35F50-A 1.51.022335F5000 DENSO 275036-5920

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata