MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

ECU BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

ECU-databaseMERCEDES › MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelS CLASS W140
MotorS300 3.0L TD 130kW/175HP
Standaard vermogen177 CV / 13 kW
Cilinderinhoud3000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC1.4
Geheugen / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Beschikbare tuning-opties:

  • Injection for boost pressure sensor 1
  • Boost pressure
  • Torque limiter

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0281001624/6251037357419/420 1.01.008 BOSCH EDC1.4
0281001624/6251037357419/420 1.01.006 BOSCH EDC1.4
0.280.001.4552.287.358.434 / 435 1.00.019 BOSCH MOTRONIC
02810016241037357710/1 16bit 1.01.011 BOSCH MOTRONIC EDC

ECU-notities

Eprom PLCC 27C010 x 2 to read with PD32. Use autoswitching KEY520 modified in KEY 540. Modify injection map adding no more than 2 numbers only over 2500 rpm and 44% load, to avoid idle problems. In the function "New file for eprom" choose KEY520 and program the modified file on a 27C040.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY. To read this EPROM with the EMP20/21 programmer you need PD32 adapters.