MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

ECU BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

ECU-databaseMERCEDES › MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelE CLASS W210
MotorE300 3.0L TD 130kW/175HP MOTRONIC
Standaard vermogen177 CV / 13 kW
Cilinderinhoud3000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC1.4
Geheugen / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Beschikbare tuning-opties:

  • Injection for boost pressure sensor 1
  • Torque limiter
  • Smoke limiter
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810014941037355763/4 1.01.015 BOSCH EDC1.4
02810017531037357845/6 1.01.015 BOSCH MOTRONIC EDC
02810018801037356586/7 1.01.035 BOSCH MOTRONIC EDC
02810018801037352663/4 1.01.000 BOSCH MOTRONIC EDC

ECU-notities

2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.