MERCEDES E CLASS W212/S212 E63 AMG 6.2L V8 386kW/518HP ME9.7

ECU BOSCH ME9.7 · 525 CV (386 kW) · 6200 cc · Benzina aspirato

ECU-databaseMERCEDES › MERCEDES E CLASS W212/S212 E63 AMG 6.2L V8 386kW/518HP ME9.7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 5 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelE CLASS W212/S212
MotorE63 AMG 6.2L V8 386kW/518HP ME9.7
Standaard vermogen525 CV / 386 kW
Cilinderinhoud6200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME9.7
Geheugen / EPROMSPANSION BGA 29CD032G

Beschikbare tuning-opties:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • HFM/HLM threshold for diagnosis
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limit for ECT sensor
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Variable intake pulsation correction

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
00090117000019020001 1.79.0130009032500 BOSCH ME9.7
00344612400009024201 1.79.0240009031400 BOSCH ME9.7
00344612400009024201 1.79.0190009032700 BOSCH ME9.7
00444637400044487040 1.79.0060044471540 BOSCH ME9.7
00444637400009024201 1.79.0140009034200 BOSCH ME9.7

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop