MERCEDES CL CLASS C215 CL600 5.5L V12 368kW/494HP ME2.7.x

ECU BOSCH ME2.7.1 · 500 CV (368 kW) · 5500 cc · Benzina sovralimentato

ECU-databaseMERCEDES › MERCEDES CL CLASS C215 CL600 5.5L V12 368kW/494HP ME2.7.x

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 3 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelCL CLASS C215
MotorCL600 5.5L V12 368kW/494HP ME2.7.x
Standaard vermogen500 CV / 368 kW
Cilinderinhoud5500 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME2.7.1
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Base timing
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Boost pressure limiter for diagnostics
  • Boost pressure limit control
  • Boost limiter correction for APS/BPS sensor
  • Load / throttle position reference
  • Engine filling management
  • Exhaust gas temperature
  • Filling factor limit
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter for LSD
  • Lambda reference
  • Boost pressure linearization
  • Knock detection factor
  • Knock detection factor - left bank
  • Speed limiter
  • Maximum indicated torque
  • Maximum boost pressure load
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Requested engine filling
  • Variable intake pulsation correction

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
27515311791037365182 1.16.028 BOSCH ME2.7.1
27515314791037365072 1.16.011 BOSCH ME2.7.1
2440071000272-22-0 1.16.016 BOSCH ME2.7.2

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.