MERCEDES B CLASS W245 B200 2.0L 16V TURBO 100kW/134HP SIM266

ECU CONTINENTAL-SIEMENS-VDO SIM 266 · 136 CV (1 kW) · 2000 cc · Benzina sovralimentato

ECU-databaseMERCEDES › MERCEDES B CLASS W245 B200 2.0L 16V TURBO 100kW/134HP SIM266

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelB CLASS W245
MotorB200 2.0L 16V TURBO 100kW/134HP SIM266
Standaard vermogen136 CV / 1 kW
Cilinderinhoud2000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM 266
Geheugen / EPROMAm29BDD160G PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Torque limiter 2
  • Advance limiter
  • Torque limiter
  • MAF sensor calibration
  • Specific air mass charge 2
  • Air mass flow

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
00144602400024484540 1.24.0020024476040_F20S1774KRS03 CONTINENTAL-SIEMENS-VDO SIM 266
00144602400024484540 1.24.0030024476040 CONTINENTAL-SIEMENS-VDO SIM 266
00144602400024484540 1.24.0050024473040_F20S207CHRS01 CONTINENTAL-SIEMENS-VDO SIM 266
00244630402669020000 1.24.0032669030200_G90S207C3RS01 CONTINENTAL-SIEMENS-VDO SIM 266
00244632400024484840 1.24.0020034479140_G60AA074MRS01 CONTINENTAL-SIEMENS-VDO SIM 266
00344660400024485640 1.24.0030044470240_H30S207C1RS02 CONTINENTAL-SIEMENS-VDO SIM 266

ECU-notities

EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 561/2 This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
Original EPROM SPANSION S29CD032 PQFP 80 Pin. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata