HYDREMA BACKHOE LOADERS 906E QSB 4.5L 86kW/115HP CM2250

ECU CONTINENTAL-SIEMENS-VDO CM2250 · 117 CV (86 kW) · 4500 cc · Diesel sovralimentato

ECU-databaseHYDREMA › HYDREMA BACKHOE LOADERS 906E QSB 4.5L 86kW/115HP CM2250

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkHYDREMA
ModelBACKHOE LOADERS
Motor906E QSB 4.5L 86kW/115HP CM2250
Standaard vermogen117 CV / 86 kW
Cilinderinhoud4500 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelCM2250
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Beschikbare tuning-opties:

  • Base timing
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Fuel quantity limitation after cold start
  • Torque limiter 2
  • Torque limiter
  • RPM limiter torque adjust
  • Air mass charge
  • Maximum indicated torque
  • Maximum indicated torque - cold ambient
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Specific injection pressure 5
  • Specific injection pressure - cold correction
  • Specific pressure injection after starting
  • Regulator current vs injection flow
  • Driver torque request
  • Turbo speed limiter - torque limiting
  • Torque model - torque to fuel quantity conversion
  • Turbo overspeed torque limiting
  • Variable geometry duty cycle limit

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
4993120DM90052.00 1.00.008 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90052.01 1.00.007 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90052.04 1.00.002 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90052.00 1.00.005 CONTINENTAL-SIEMENS-VDO CM2250

ECU-notities

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
This Setting File can be used for serial system NewGenius.