HYDREMA BACKHOE LOADERS 926E 4.5L 16V 105kW/141HP CM2250

ECU CONTINENTAL-SIEMENS-VDO CM2250 · 143 CV (105 kW) · 4500 cc · Diesel sovralimentato

ECU-databaseHYDREMA › HYDREMA BACKHOE LOADERS 926E 4.5L 16V 105kW/141HP CM2250

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkHYDREMA
ModelBACKHOE LOADERS
Motor926E 4.5L 16V 105kW/141HP CM2250
Standaard vermogen143 CV / 105 kW
Cilinderinhoud4500 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelCM2250
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Beschikbare tuning-opties:

  • Base timing
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Fuel quantity limitation after cold start
  • Torque limiter 2
  • Torque limiter
  • RPM limiter torque adjust
  • Air mass charge
  • Maximum indicated torque
  • Maximum indicated torque - cold ambient
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Specific injection pressure 5
  • Specific injection pressure - cold correction
  • Specific pressure injection after starting
  • Regulator current vs injection flow
  • Driver torque request
  • Turbo speed limiter - torque limiting
  • Torque model - torque to fuel quantity conversion
  • Turbo overspeed torque limiting
  • Variable geometry duty cycle limit

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
4993120DM90051.03 1.00.006 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90051.01 1.00.008 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90051.04 1.00.007 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90051.00 1.00.009 CONTINENTAL-SIEMENS-VDO CM2250
4993120DM90051.00 1.00.022 CONTINENTAL-SIEMENS-VDO CM2250

ECU-notities

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata