ECU-database ›
FORD › FORD RANGER Mk4 Raptor 3.0L V6 24V EcoBoost 215kW/288HP MG1CS036
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 6 firmwareversies
Voertuiggegevens
| Merk | FORD |
| Model | RANGER Mk4 |
| Motor | Raptor 3.0L V6 24V EcoBoost 215kW/288HP MG1CS036 |
| Standaard vermogen | 292 CV / 215 kW |
| Cilinderinhoud | 3000 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | MG1CS036 |
| Geheugen / EPROM | Micro Infinenon TRICORE categoria AURIX. Il micro ha una DFLASH 528 Kbyte |
Beschikbare tuning-opties:
- Base timing
- Max threshold air mass flow throught compressor
- Knock correction advance max
- Knock correction advance max 2
- Desired engine load calculation
- Part pedal combustion load limit
- Exhaust gas temperature
- Engine indicated torque at stoichiometric
- Torque limiter
- Lambda enrichment - open loop
- RPM Limiter
- RPM Limiter 2
- RPM limiter - N
- Lambda driver wish
- Load limit at high effectiveness of LSPI mitigation
- Load limit at low effectiveness of LSPI mitigation
- Load limit at nominal effectiveness of LSPI mitigation
- Speed limiter
- Speed limiter 2
- Cruise control speed limiter
- Maximum advance allowed
- Intake manifold pressure
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Max load
- Maximum throttle angle opening for a given RPM
- Percent accelerator pedal angle to desired throttle angle
- Driver torque request
Firmware-identificatoren (6)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.94.035 | NB3A-14C204-BBG |
BOSCH MG1CS036 |
| — | — |
1.94.002 | RB3A-14C204-BAB |
BOSCH MG1CS036 |
| — | — |
1.94.008 | NB3A-14C204-BBH |
BOSCH MG1CS036 |
| — | — |
1.94.013 | NB3A-14C204-BSA |
BOSCH MG1CS036 |
| — | — |
1.94.004 | NB3A-14C204-BBF |
BOSCH MG1CS036 |
| — | — |
1.94.007 | NB3A-14C204-BRA |
BOSCH MG1CS036 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
Micro Infineon Tricore TC399TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
