FORD ESCORT 1.6L 16V

ECU FORD EFI EEC IV · 88 CV (65 kW) · 1600 cc · Benzina aspirato

ECU-databaseFORD › FORD ESCORT 1.6L 16V

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 3 firmwareversies

Voertuiggegevens

MerkFORD
ModelESCORT
Motor1.6L 16V
Standaard vermogen88 CV / 65 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantFORD EFI
ModelEEC IV
Geheugen / EPROM27C256 DIL28/PLCC32 256Kbit - Eprom 32K x 8

Beschikbare tuning-opties:

  • Spark advance during acceleration
  • Advance at part load
  • Advance correction
  • Idle electrovalve 5
  • Injection at part load
  • Injection correction

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
EEC IV 4V2WIND 1.00.007 FORD EFI EEC IV
DESK 1.00.001 FORD EFI EEC V
02612038351037358710 1.00.003 BOSCH MOTRONIC

Technische voertuignotities

OBD with lid located in the central tunnel, to the left of the passenger's side.

ECU-notities

Original Eprom DIL 24 pins FORD; It can be read ONLY with the specific FORD EPROM readers. To put the modified data you need ALSO Ford calibration card with a 27C256 DIL eprom. In the Advance Correction Map (ONLY) you have to reduce numbers in order to increase advance.
Original EPROM 27C1028 or 87C510 Use ADTMS adapter for read original EPROM with EMP20. CNVTMS must be used for the real time emulator and for final installation on the ECU with a 27C512 EPROM.
Original Eprom DIL 24 pins FORD (512 kbits); It can be read ONLY with specific FORD EPROM readers. To put the modified data you need ALSO Ford calibration card with a 28F512 PLCC eprom.