FORD RANGER Mk2 3.0L TD POWERSTROKE 122kW/164HP SID901

ECU CONTINENTAL-SIEMENS-VDO SID901 · 166 CV (122 kW) · 3000 cc · Diesel sovralimentato

ECU-databaseFORD › FORD RANGER Mk2 3.0L TD POWERSTROKE 122kW/164HP SID901

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkFORD
ModelRANGER Mk2
Motor3.0L TD POWERSTROKE 122kW/164HP SID901
Standaard vermogen166 CV / 122 kW
Cilinderinhoud3000 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSID901
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Injection at part load
  • Injection correction
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Air mass flow

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
3010081319AAxxJ4430P06NQ0300 1.47.010300Dxxxx.HEX CONTINENTAL-SIEMENS-VDO SID901
7210117697AAR3G63R13FQ0720 1.47.007720Dxxxx.HEX CONTINENTAL-SIEMENS-VDO SID901
7210121644AAR3H63R13FQ0720 1.47.006 CONTINENTAL-SIEMENS-VDO SID901
7210199904AAR3H63R14FQ0720 1.47.004 CONTINENTAL-SIEMENS-VDO SID901
7210199908AAR3G63R14FQ0720 1.47.002 CONTINENTAL-SIEMENS-VDO SID901
72S122110002B0R3G63R08FQ0720 1.47.006 CONTINENTAL-SIEMENS-VDO SID901
72S122110002D0R3G63R10FQ0720 1.47.028 CONTINENTAL-SIEMENS-VDO SID901
S122106001B0630Dxxxx.HEX 1.47.0055WS40139G-T CONTINENTAL-SIEMENS-VDO SID901

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. To work on this ECU you can use NewTrasdata