FORD FOCUS Mk3 2.0L TDCi 85kW/115HP DCM3.5

ECU DELPHI DCM3.5 · 116 CV (85 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseFORD › FORD FOCUS Mk3 2.0L TDCi 85kW/115HP DCM3.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkFORD
ModelFOCUS Mk3
Motor2.0L TDCi 85kW/115HP DCM3.5
Standaard vermogen116 CV / 85 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM3.5
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for smoke limitation
  • Maximum indicated torque (overboost active)
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Torque model - torque to fuel quantity conversion
  • Variable geometry duty cycle limit

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
BV61-12A650-ACFBV61-14C204-BF 1.81.007 DELPHI DCM3.5
BV61-12A650-AGDBV61-14C204-FD 1.81.011 DELPHI DCM3.5
BV61-12A650-AGJBV61-14C204-FJ 1.81.014 DELPHI DCM3.5
BW61-12A650-ACGBV61-14C204-BG 1.81.006 DELPHI DCM3.5

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata