FORD EXPLORER Mk5 3.5L V6 24V EcoBoost 262kW/351HP MEDG17.0

ECU BOSCH MEDG17.0 · 356 CV (262 kW) · 3500 cc · Benzina sovralimentato

ECU-databaseFORD › FORD EXPLORER Mk5 3.5L V6 24V EcoBoost 262kW/351HP MEDG17.0

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 4 firmwareversies

Voertuiggegevens

MerkFORD
ModelEXPLORER Mk5
Motor3.5L V6 24V EcoBoost 262kW/351HP MEDG17.0
Standaard vermogen356 CV / 262 kW
Cilinderinhoud3500 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMEDG17.0
Geheugen / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure
  • Load / throttle position reference
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • Injection 1
  • Torque limiter
  • Knock detection factor
  • Maximum indicated torque
  • Main injection
  • Specific air mass flow quantity limiter
  • Air mass flow
  • Driver torque request

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
GB5A-12B684-HA 1.94.004GB5A-14C204-ARH BOSCH MEDG17.0
GB5A-12B684-HA 1.94.002GB5A-14C204-KF BOSCH MEDG17.0
GB5A-12B684-HA 1.94.007GB5A-14C204-ARD BOSCH MEDG17.0
GB5A-12B684-HA 1.94.003GB5A-14C204-ARE BOSCH MEDG17.0

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

MICRO Infineon Tricore TC1797 To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop