FORD EXPLORER Mk3 4.6 L V8 175kW/235HP EEC-VI

ECU FORD EFI EEC VI · 238 CV (175 kW) · 4600 cc · Benzina aspirato

ECU-databaseFORD › FORD EXPLORER Mk3 4.6 L V8 175kW/235HP EEC-VI

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkFORD
ModelEXPLORER Mk3
Motor4.6 L V8 175kW/235HP EEC-VI
Standaard vermogen238 CV / 175 kW
Cilinderinhoud4600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantFORD EFI
ModelEEC VI
Geheugen / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Beschikbare tuning-opties:

  • Base timing
  • Advance for ECT sensor
  • Optimal spark timing/MBT
  • Advance for IAT sensor
  • Desired engine load calculation
  • Desired fuel quantity map for open loop
  • Engine idle
  • Engine idle in Park position
  • Injection 1
  • RPM Limiter
  • RPM limiter - fuel cut
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum throttle angle opening for a given RPM
  • Air mass flow
  • Driver torque request
  • Throttle angle limitation
  • Torque limit table for ECT sensor

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
4L2AAPDJMAJDEZ.HEX 1.00.018 FORD EFI EEC VI
4U7AJMDPWAQ1AA.HEX 1.00.012 FORD EFI EEC VI

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

This Setting File can be used for serial system NewGenius.