FORD EDGE 2.0L 16V TDCi 110kW/147HP DCM6.X

ECU DELPHI DCM6.1 · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseFORD › FORD EDGE 2.0L 16V TDCi 110kW/147HP DCM6.X

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkFORD
ModelEDGE
Motor2.0L 16V TDCi 110kW/147HP DCM6.X
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM6.1
Geheugen / EPROMMicro BGA ST SPC5674 - 32768 Kbit -400000

Beschikbare tuning-opties:

  • Torque limiter 1 gear
  • Torque limiter 2 gear
  • Torque limiter 3 gear
  • Torque limiter 4 gear
  • Torque limiter 5 gear
  • Torque limiter other gears
  • Boost pressure
  • EGR valve control
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Engine idle
  • Injection period
  • Injection period 2
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter
  • Lambda value of the smoke limitation
  • Maximum indicated torque
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Driver torque request
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limit table for IAT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Sport mode
  • Variable geometry duty cycle limit

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1TFMCBFL_B061D01GV61-12A650-MC 1.54.010GV61-14C204-DK DELPHI DCM6.1

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor BGA SPC5674 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata