DACIA SANDERO Mk1 (B90) 1.0L 16V 57kW/76HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 77 CV (57 kW) · 1000 cc · Benzina aspirato

ECU-databaseDACIA › DACIA SANDERO Mk1 (B90) 1.0L 16V 57kW/76HP SIM32

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkDACIA
ModelSANDERO Mk1 (B90)
Motor1.0L 16V 57kW/76HP SIM32
Standaard vermogen77 CV / 57 kW
Cilinderinhoud1000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM32
Geheugen / EPROMMicro RENESAS - 4096 Kbit - 80000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
82005563378200971691 1.73.0098200675508 CONTINENTAL-SIEMENS-VDO SIM32
82005563378201052035 1.73.0098200942090 CONTINENTAL-SIEMENS-VDO SIM32

Technische voertuignotities

OBD visible at the bottom of the glove compartment.

ECU-notities

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop