DACIA LOGAN Mk1 1.6L 16V 64kW/86HP SIRIUS32

ECU CONTINENTAL-SIEMENS-VDO SIRIUS 32 · 87 CV (64 kW) · 1600 cc · Benzina aspirato

ECU-databaseDACIA › DACIA LOGAN Mk1 1.6L 16V 64kW/86HP SIRIUS32

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkDACIA
ModelLOGAN Mk1
Motor1.6L 16V 64kW/86HP SIRIUS32
Standaard vermogen87 CV / 64 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIRIUS 32
Geheugen / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Beschikbare tuning-opties:

  • Advance at part load
  • Advance correction
  • Weighting map cold-start
  • Injection at part load
  • Fuel mass injection at start up

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
82003263803134303031 1.25.006 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200430967 1.25.003 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200659218 1.25.013 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200661124 1.25.013 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938201096255 1.25.006 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200691390 1.25.005 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200936825 1.25.003 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200691374 1.25.004 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938201009862 1.25.009 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82010339648201056018 1.25.005 CONTINENTAL-SIEMENS-VDO SIRIUS 32

Technische voertuignotities

OBD visible at the bottom of the glove compartment.

ECU-notities

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file can work with files from Genius or New Genius only. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F200BB. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata