CLAAS JAGUAR 900 16L 458kW/614HP TEMIC — ECU TEMIC TEMIC PLD

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	CLAAS
Model	JAGUAR
Motor	900 16L 458kW/614HP TEMIC
Standaard vermogen	623 CV / 458 kW
Cilinderinhoud	16000 cc
Brandstof	Diesel sovralimentato
Voertuigtype	Tractor

ECU

Fabrikant	TEMIC
Model	TEMIC PLD
Geheugen / EPROM	29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Beschikbare tuning-opties:

Max threshold air mass flow throught compressor
Boost pressure limiter
Protection for engine overheating
Protection for engine overheating 2
Protection for engine overheating 3
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection angle
Injection angle 2
Injection angle - correction
Injection delivery angle
Smoke limiter
Maximum indicated torque
Max torque profile

Firmware-identificatoren (7)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
—	53G	1.54.012	—	TEMIC TEMIC PLD
—	06A	1.54.014	—	TEMIC TEMIC PLD
—	56E	1.54.021	—	TEMIC TEMIC PLD
—	08E	1.54.013	—	TEMIC TEMIC PLD
—	H51	1.54.006	—	TEMIC TEMIC PLD
—	60A	1.54.017	—	TEMIC TEMIC PLD
—	23E	1.54.008	—	TEMIC TEMIC PLD

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

This Setting File can be used for serial system NewGenius.

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere CLAAS

JAGUAR
890 16L 370kW/496HP TEMIC JAGUAR
870 12.8L 322kW/432HP TEMIC JAGUAR
850 12.8L L6 302kW/405HP TEMIC JAGUAR
830 12.8L 236kW/317HP TEMIC ARES
816 6.8L 121kW/165HP PHOENIX L12 ARES
826 6.8L 129kW/175HP PHOENIX L12 ARES
836 6.8L 143kW/195HP PHOENIX L4 LEXION
580 16L 362kW/485HP TEMIC LEXION
410 7.2L 146kW/196HP ADEMIII JAGUAR
870 16L 333kW/447HP TEMIC

→ Alle ECU's CLAAS