CLAAS JAGUAR 830 12.8L 236kW/317HP TEMIC

ECU TEMIC TEMIC PLD · 321 CV (236 kW) · 12800 cc · Diesel sovralimentato

ECU-databaseCLAAS › CLAAS JAGUAR 830 12.8L 236kW/317HP TEMIC

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkCLAAS
ModelJAGUAR
Motor830 12.8L 236kW/317HP TEMIC
Standaard vermogen321 CV / 236 kW
Cilinderinhoud12800 cc
BrandstofDiesel sovralimentato
VoertuigtypeTractor

ECU

FabrikantTEMIC
ModelTEMIC PLD
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Max threshold air mass flow throught compressor
  • Boost pressure limiter
  • Protection for engine overheating
  • Protection for engine overheating 2
  • Protection for engine overheating 3
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection angle
  • Injection angle 2
  • Injection angle - correction
  • Injection delivery angle
  • Smoke limiter
  • Maximum indicated torque
  • Max torque profile

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
56E 1.54.008 TEMIC TEMIC PLD
08E 1.54.012 TEMIC TEMIC PLD
06A 1.54.014 TEMIC TEMIC PLD
23E 1.00.010 TEMIC TEMIC PLD
60A 1.54.013 TEMIC TEMIC PLD
53G 1.54.019 TEMIC TEMIC PLD

ECU-notities

Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
This Setting File can be used for serial system NewGenius.