BENTLEY CONTINENTAL GT 6.0L V12 BITURBO 460kW/617HP ME7.1.1

ECU BOSCH ME7.1.1 · 625 CV (46 kW) · 6000 cc · Benzina sovralimentato

ECU-databaseBENTLEY › BENTLEY CONTINENTAL GT 6.0L V12 BITURBO 460kW/617HP ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 1 firmwareversies

Voertuiggegevens

MerkBENTLEY
ModelCONTINENTAL GT
Motor6.0L V12 BITURBO 460kW/617HP ME7.1.1
Standaard vermogen625 CV / 46 kW
Cilinderinhoud6000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limit control
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Injection at part load
  • Lambda enrichment for components protection
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Optimal engine moment
  • Driver torque request
  • Throttle angle management

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612014221037382127 1.84.01007C906018EC P0000 BOSCH ME7.1.1

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop