VOLKSWAGEN VENTO (A5) 2.5L 20V 125kW/168HP ME7.1.1

Calculateur BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina aspirato

Base de données calculateursVOLKSWAGEN › VOLKSWAGEN VENTO (A5) 2.5L 20V 125kW/168HP ME7.1.1

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 4 versions firmware

Données véhicule

MarqueVOLKSWAGEN
ModèleVENTO (A5)
Moteur2.5L 20V 125kW/168HP ME7.1.1
Puissance d'origine170 CV / 125 kW
Cylindrée2500 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.1.1
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Limiteur de tours / vitesse
  • Limiteur de avance
  • Limiteur de couple
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de cliquetis
  • Limiteur de vitesse
  • Débit de masse d'air

Identifiants firmware (4)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612015021037383981 1.42.00407K906032BF 0603 BOSCH ME7.1.1
02612016791037390701 1.84.01907K906032BM 0711 BOSCH ME7.1.1
02612088571037380985 1.42.01007K906032H 0610 BOSCH ME7.1.1
02612088581037380894 1.42.00607K906032J 0610 BOSCH ME7.1.1

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata