VOLKSWAGEN SURAN/SPACEFOX/SPORTVAN/FOX PLUS 1.6L 8V 74kW/100HP ME7.5.10

Calculateur BOSCH ME7.5.10 · 101 CV (74 kW) · 1600 cc · Benzina aspirato

Base de données calculateursVOLKSWAGEN › VOLKSWAGEN SURAN/SPACEFOX/SPORTVAN/FOX PLUS 1.6L 8V 74kW/100HP ME7.5.10

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 1 versions firmware

Données véhicule

MarqueVOLKSWAGEN
ModèleSURAN/SPACEFOX/SPORTVAN/FOX PLUS
Moteur1.6L 8V 74kW/100HP ME7.5.10
Puissance d'origine101 CV / 74 kW
Cylindrée1600 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.5.10
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Avance principale
  • Avance optimal
  • Calcul de charge du moteur désirée
  • Correction lambda en fonction de la température du moteur après le début
  • Facteur pour corriger le système d'injection de carburant
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de tours
  • Lambda demandée
  • Limiteur de cliquetis
  • Calcul du débit massique d'air d'accélérateur
  • Couple optimal du moteur
  • Demande de couple
  • Couple demandeé en mode Sport
  • Gestion angle papillon

Identifiants firmware (1)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612083801037377476 1.21.015032906032J 1003 BOSCH ME7.5.10

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata