VOLKSWAGEN POLO 4 (9N) 1.2L 6V 44kW/59HP SIMOS 3PE/3PG

Calculateur CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG · 60 CV (44 kW) · 1200 cc · Benzina aspirato

Base de données calculateursVOLKSWAGEN › VOLKSWAGEN POLO 4 (9N) 1.2L 6V 44kW/59HP SIMOS 3PE/3PG

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 13 versions firmware

Données véhicule

MarqueVOLKSWAGEN
ModèlePOLO 4 (9N)
Moteur1.2L 6V 44kW/59HP SIMOS 3PE/3PG
Puissance d'origine60 CV / 44 kW
Cylindrée1200 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantCONTINENTAL-SIEMENS-VDO
ModèleSIMOS 3PB/3PE/3PG
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Avance correction
  • Injection charge partielle
  • Charge spécifique de masse d'air 2
  • Débit de masse d'air

Identifiants firmware (13)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
1.33.01203E906033L 7001 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01403E906033N 4728 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01703E906033L 4726 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01703E906033 7000 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.00803D997033F 7000 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.00803D906033F 2509 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01203E906033 4649 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01303E906033 4266 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01503E906033 4340 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.00903E906033R 7002 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.00903D997033F 7002 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.01303E906033R 7002 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG
1.33.00903E906033 7000 CONTINENTAL-SIEMENS-VDO SIMOS 3PB/3PE/3PG

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Modules additionnels disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop