PORSCHE 997 3.8L CARRERA S 261kW/350HP ME7.8.1 — Calculateur BOSCH ME7.8.1

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 54 versions firmware

Obtenez le fichier pour ce véhicule

Achetez le fichier (origine ou reprogrammé)Inscrivez-vous sur mastertuningfile.com et commandez le fichier

Vous êtes un garage ou un tuner ?

Données véhicule

Marque	PORSCHE
Modèle	997
Moteur	3.8L CARRERA S 261kW/350HP ME7.8.1
Puissance d'origine	355 CV / 261 kW
Cylindrée	3800 cc
Carburant	Benzina aspirato
Type de véhicule	Auto

Calculateur

Fabricant	BOSCH
Modèle	ME7.8.1
Mémoire / EPROM	29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

Avance principale
Avance minimale autorisé
Avance optimal
Calcul de charge du moteur désirée
Correction lambda en fonction de la température du moteur après le début
Température des gaz d'échappement
Facteur pour corriger le système d'injection de carburant
Facteur pour corriger le système d'injection de carburant 2
Limite haute de flux d'air HFM/HLM
Limite basse du flux d'air HFM / HLM
Enrichissement Lambda pour la protection des composants
Cartographie de limiteur de couple en fonction de la haute température d'échappement
Efficacité Lambda
Limiteur de tours
Limiteur de tours en position de Parking
Lambda demandée
Limiteur de cliquetis
Calibration capteur MAF
Couple maximale indiqué
Couple maximale
Maximum ignition delay allowed for knock limiter intervention
Charge maximale possible du moteur
Calcul du débit massique d'air d'accélérateur
Minimum engine air charge value
Number of injections considered for knock limitation
Couple optimal du moteur
Offset tolérance en fonction de la couple admissible
Couple admissible relative de la position de la pédale à limitation de couple
Couple admissible relative de la position de la pédale à limitation de couple - mode sport/race
Couple admissible relative de la position de la pédale à limitation de couple - mode sport/race 2
Consigne pédale d'accelerateur
Demande de couple
Demande de couple en marche arrière
Couple demandeé en mode Sport
Seuil maximal de détection du cliquetis du moteur - banque 1
Seuil maximal de détection du cliquetis du moteur - banque 2
Gestion angle papillon
Correction de pulsation apport variable

Identifiants firmware (54)

N° Hardware	N° Software (chip)	Version	Logiciel de mise à jour	Calculateur
0261207987	1037369642	1.27.008	0041900007333A19	BOSCH ME7.8.1
0261207987	1037369642	1.27.005	0041900007333A22	BOSCH ME7.8.1
0261207987	1037379149	1.27.016	0041900007413A08	BOSCH ME7.8.1
0261207987	1037369642	1.27.006	0041900007103A01	BOSCH ME7.8.1
0261207987	1037379149	1.27.004	0041900007413A12	BOSCH ME7.8.1
0261207987	1037369642	1.27.014	0041900007113A14	BOSCH ME7.8.1
0261207987	1037379149	1.27.006	0041900007413A0D	BOSCH ME7.8.1
0261207987	1037369642	1.27.013	0041900007333A18	BOSCH ME7.8.1
0261207987	1037369642	1.27.007	0041900007333A11	BOSCH ME7.8.1
0261207987	1037369642	1.27.016	0041900007333A29	BOSCH ME7.8.1
0261207987	1037369642	1.27.003	0041900007103A0E	BOSCH ME7.8.1
0261207987	1037379149	1.27.005	0041900007413A02	BOSCH ME7.8.1
0261207987	1037369642	1.27.006	0041900007103A02	BOSCH ME7.8.1
0261207987	1037369642	1.27.046	0041900007113A03	BOSCH ME7.8.1
0261207987	1037379149	1.27.004	0041900007413A01	BOSCH ME7.8.1
0261207987	1037369642	1.27.007	0041900007337A07	BOSCH ME7.8.1
0261207987	1037369642	1.27.005	0041900007333A01	BOSCH ME7.8.1
0261207987	1037369642	1.27.009	004190000710390D	BOSCH ME7.8.1
0261207987	1037369642	1.27.021	0041900007103A08	BOSCH ME7.8.1
0261207987	1037379149	1.27.024	0041900007411037	BOSCH ME7.8.1
0261207987	1037379149	1.27.008	0041900007417A17	BOSCH ME7.8.1
0261207987	1037369642	1.27.006	0041900007103A0K	BOSCH ME7.8.1
0261207987	1037369642	1.27.005	0041900007337A2J	BOSCH ME7.8.1
0261207987	1037369642	1.27.005	0041900007103901	BOSCH ME7.8.1
0261207987	1037369642	1.27.003	0041900007113A04	BOSCH ME7.8.1
0261207987	1037369642	1.27.005	004190000710390E	BOSCH ME7.8.1
0261207987	1037379149	1.27.007	0041900007413939	BOSCH ME7.8.1
0261207987	1037369642	1.27.006	0041900007103A19	BOSCH ME7.8.1
0261207987	1037369642	1.27.003	0041900007337A16	BOSCH ME7.8.1
0261207987	1037379149	1.27.005	0041900007413A0K	BOSCH ME7.8.1
0261207987	1037379149	1.27.008	0041900007413A18	BOSCH ME7.8.1
0261207987	1037369642	1.27.007	0041900007337A17	BOSCH ME7.8.1
0261207987	1037369642	1.27.008	0041900007333A03	BOSCH ME7.8.1
0261207987	1037379149	1.27.007	0041900007413A09	BOSCH ME7.8.1
0261207987	1037369642	1.27.009	0041900007333A09	BOSCH ME7.8.1
0261207987	1037379149	1.27.013	0041900007413A19	BOSCH ME7.8.1
0261207987	1037369642	1.27.011	0041900007333A08	BOSCH ME7.8.1
0261207987	1037369642	1.27.007	0041900007103A0L	BOSCH ME7.8.1
0261207987	1037369642	1.27.015	0041900007103A09	BOSCH ME7.8.1
0261208300	1037369620	1.27.008	00419100A8223A34	BOSCH ME7.8.1
0261208300	1037369620	1.27.005	00419100A8223A13	BOSCH ME7.8.1
0261208300	1037369620	1.27.007	00419100A8227A09	BOSCH ME7.8.1
0261208300	1037369620	1.27.005	00419100A8223A03	BOSCH ME7.8.1
0261208300	1037379150	1.27.004	00419100A8423A14	BOSCH ME7.8.1
0261208300	1037379150	1.27.005	00419100A8423A13	BOSCH ME7.8.1
0261208300	1037379150	1.27.003	00419100A8423A04	BOSCH ME7.8.1
0261208300	1037379150	1.27.007	00419100A8423A23	BOSCH ME7.8.1
0261208300	1037369620	1.27.012	00419100A8223A33	BOSCH ME7.8.1
0261208300	1037379150	1.27.006	00419100A8423A24	BOSCH ME7.8.1
0261208300	1037379150	1.27.003	00419100A8423924	BOSCH ME7.8.1
0261208300	1037369620	1.27.008	00419100A8227A29	BOSCH ME7.8.1
0261208300	1037369620	1.27.012	00419100A8223A23	BOSCH ME7.8.1
0261208300	1037379150	1.27.015	00419100A8423A03	BOSCH ME7.8.1
0261208300	1037369620	1.27.005	00419100A8223A24	BOSCH ME7.8.1

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Modules additionnels disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy

Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

Obtenez le fichier pour ce véhicule

Achetez le fichier (origine ou reprogrammé)Inscrivez-vous sur mastertuningfile.com et commandez le fichier Vous êtes un garage ou un tuner ?Proposez vous-même ces services : activez votre plateforme TuningFile

Outils pour lire et écrire ce calculateur

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Acheter

The Genius OBD + Bench € 2.500 Acheter

Autres PORSCHE

911
3.2L CARRERA 170kW/228HP Motronic 924
2.5L 16V S 110kW/148HP 944
3.0L S2 155kW/208HP Motronic 944
2.5L Turbo 162kW/217HP Motronic 993
3.6L CARRERA 200kW/268HP M2.7 968
3.0L 177kW/237HP M2.7 928
5.0L S4 235kW/315HP 996
3.4L CARRERA 221kW/296HP M5.2.2 996
3.4L CARRERA 221kW/296HP ME7.2 964
3.6L TURBO S 280kW/376HP M2.7

→ Tous les calculateurs PORSCHE