MV AGUSTA F3 800 17->20 109kW

Calculateur ELDOR NEMO 2.0 · 148 CV (109 kW) · 800 cc · Benzina aspirato

Base de données calculateursMV AGUSTA › MV AGUSTA F3 800 17->20 109kW

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 14 versions firmware

Données véhicule

MarqueMV AGUSTA
ModèleF3 800
Moteur17->20 109kW
Puissance d'origine148 CV / 109 kW
Cylindrée800 cc
CarburantBenzina aspirato
Type de véhiculeMoto

Calculateur

FabricantELDOR
ModèleNEMO 2.0
Mémoire / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Opérations / options de tuning disponibles:

  • Avance correction cylindre 2
  • Avance principale
  • Lambda/AFR en charge partielle
  • Avance optimal
  • Correction avance à l'allumage pour le capteur ECT
  • Calcul de charge du moteur désirée
  • Correction Lambda
  • Correction Lambda 2
  • Limiteur de tours
  • Limiteur de tours 2
  • Lambda demandée
  • Limiteur de vitesse
  • Débit de masse d'air
  • Demande de couple
  • Couple demandeé - MT
  • Demande de couple en map set 2
  • Demande de couple en map set 3
  • Gestion angle papillon

Identifiants firmware (14)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
M3A36R-0911 1.00.0030911P014 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911PB14 ELDOR NEMO 2.0
M3A36R-0911 1.00.0030911PK14 ELDOR NEMO 2.0
M3A36R-0910 1.00.0050910P013 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PB13 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PC13 ELDOR NEMO 2.0
M3A36R-0910 1.00.0030910PK13 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913P015 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PB15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PB16 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PC15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PK15 ELDOR NEMO 2.0
M3A36R-0913 1.00.0030913PK16 ELDOR NEMO 2.0
M3A36R-0911 1.00.0060911PC14 ELDOR NEMO 2.0

Notes techniques véhicule

OBD placé sous la selle

Notes calculateur

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.