AUDI S4 (8H/B7/8E) 4.2L V8 32V 309kW/414HP ME7.1.1

Calculateur BOSCH ME7.1.1 · 420 CV (309 kW) · 4200 cc · Benzina aspirato

Base de données calculateursAUDI › AUDI S4 (8H/B7/8E) 4.2L V8 32V 309kW/414HP ME7.1.1

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 13 versions firmware

Données véhicule

MarqueAUDI
ModèleS4 (8H/B7/8E)
Moteur4.2L V8 32V 309kW/414HP ME7.1.1
Puissance d'origine420 CV / 309 kW
Cylindrée4200 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.1.1
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Limiteur de avance
  • Limiteur de couple
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de cliquetis
  • Débit de masse d'air

Identifiants firmware (13)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612011131037376347 1.42.0108E0910560T 0010 BOSCH ME7.1.1
02612013581037381476 1.84.0098E2910560B 0010 BOSCH ME7.1.1
02612013591037381475 1.84.0148E2910560C 0010 BOSCH ME7.1.1
02612018721037389414 1.84.0128E2910560G 0010 BOSCH ME7.1.1
02612084421037372812 1.42.0138E0910560J 0010 BOSCH ME7.1.1
02612084421037376349 1.42.0088E0910560J 0020 BOSCH ME7.1.1
02612084431037374043 1.42.0078E0910560K 0010 BOSCH ME7.1.1
02612084451037374042 1.42.0038E0910560M 0010 BOSCH ME7.1.1
02612084461037372814 1.42.0058E0910560N 0001 BOSCH ME7.1.1
02612084471037372810 1.42.0188E0910560P 0010 BOSCH ME7.1.1
02612088521037380111 1.84.0068E2910560 0030 BOSCH ME7.1.1
02612088531037380113 1.84.0138E2910560A 0030 BOSCH ME7.1.1
02612088551037376227 1.84.0088H2910560A 0010 BOSCH ME7.1.1

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.