AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

Calculateur BOSCH ME7.1/5 · 250 CV (184 kW) · 2700 cc · Benzina sovralimentato

Base de données calculateursAUDI › AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 10 versions firmware

Données véhicule

MarqueAUDI
ModèleALLROAD A4/A6
Moteur2.7L BITURBO 184kW/247HP ME7.1
Puissance d'origine250 CV / 184 kW
Cylindrée2700 cc
CarburantBenzina sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.1/5
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Limiteur de pression turbo pour le diagnostic
  • Limiteur de pression turbo
  • Limiteur de pression turbo 2
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de avance
  • Limiteur de couple
  • Contr. de stabilité pression turbo
  • Controle de la pression turbo max
  • Référence charge pedal / position du papillon - AT
  • Débit de masse d'air

Identifiants firmware (10)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612066401037354754 1.21.0054Z7907551B 0003 BOSCH ME7.1/5
02612066411037354775 1.21.0124Z7907551C 0005 BOSCH ME7.1/5
02612066411037354549 1.21.0074Z7907551C 0003 BOSCH ME7.1/5
02612071341037360277 1.21.0214Z7907551E 0001 BOSCH ME7.1/5
02612071341037354808 1.21.0044Z7907551E 0001 BOSCH ME7.1/5
02612071371037360858 1.21.0124Z7907551D 0002 BOSCH ME7.1/5
02612071381037360874 1.21.0104Z7907551H 0002 BOSCH ME7.1/5
02612071381037354847 1.21.0064Z7907551H 0001 BOSCH ME7.1/5
02612072601037360860 1.21.0054Z7907551K 0002 BOSCH ME7.1/5
02612072601037360166 1.21.0044Z7907551K 0001 BOSCH ME7.1/5

Notes techniques véhicule

OBD située à gauche du côté conducteur, accessible sans rien retirer, à la gauche du pédalier.

Notes calculateur

Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.