AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 132KW/177HP ME7.5

Calculateur BOSCH ME7.5 · 179 CV (132 kW) · 1800 cc · Benzina sovralimentato

Base de données calculateursAUDI › AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 132KW/177HP ME7.5

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 4 versions firmware

Données véhicule

MarqueAUDI
ModèleA4 (B6/8E/8H)
Moteur1.8L 20V TURBO 132KW/177HP ME7.5
Puissance d'origine179 CV / 132 kW
Cylindrée1800 cc
CarburantBenzina sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.5
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance principale
  • Avance au rallenti
  • Avance optimal
  • Limiteur de pression turbo 4
  • Limiteur de pression turbo 5
  • Controle limite de pression de turbo
  • Calcul de charge du moteur désirée
  • Rapport limite maximale de pression pour le diagnostic
  • Température des gaz d'échappement
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de tours
  • Linéarisation pression turbo
  • Lambda demandée
  • Limiteur de cliquetis
  • Charge maximale de la pression de suralimentation
  • Couple optimal du moteur
  • Offset tolérance en fonction de la couple admissible
  • Couple admissible relative de la position de la pédale à limitation de couple
  • Rapport de pression en fonction température d'air admission
  • Rapport limite maximale de pression pour la température
  • Demande de couple
  • Gestion angle papillon
  • Correction de pulsation apport variable

Identifiants firmware (4)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612068781037380902 1.42.007 BOSCH ME7.5
02612072161037360101 1.21.0174B0906018CH 0001 BOSCH ME7.5
02612072161037360854 1.21.0174B0906018CH 0002 BOSCH ME7.5
02612082301037378109 1.42.0158E0909518AK 0006 BOSCH ME7.5

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata