VOLKSWAGEN SURAN/SPACEFOX/SPORTVAN/FOX PLUS 1.6L 8V 74kW/100HP ME7.5.10

Steuergerät BOSCH ME7.5.10 · 101 CV (74 kW) · 1600 cc · Benzina aspirato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN SURAN/SPACEFOX/SPORTVAN/FOX PLUS 1.6L 8V 74kW/100HP ME7.5.10

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 1 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellSURAN/SPACEFOX/SPORTVAN/FOX PLUS
Motor1.6L 8V 74kW/100HP ME7.5.10
Serienleistung101 CV / 74 kW
Hubraum1600 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.5.10
Speicher / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Optimaler Zündwinkel
  • Berechnung Motor Sollfüllung
  • Kennfeld Lambda-Motor-Beschreibung im Nachstart
  • Korrekturfaktor Kraftstoffversorgungssystem
  • Lambda-Anreicherung für Bauteileschutz
  • Drehzahlbegrenzer
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Berechnung Massenstrom über Drosselklappe
  • Optimales Motormoment
  • Fahrerwunsch drehmoment
  • Fahrerwunsch drehmoment im modus Sport
  • Drosselklappen-Sollwinkel

Firmware-Kennungen (1)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612083801037377476 1.21.015032906032J 1003 BOSCH ME7.5.10

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata