VOLKSWAGEN NEW BEETLE 2.3L 20V 125kW/168HP ME7.1

Steuergerät BOSCH ME7.1/3 · 170 CV (125 kW) · 2300 cc · Benzina aspirato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN NEW BEETLE 2.3L 20V 125kW/168HP ME7.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 3 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellNEW BEETLE
Motor2.3L 20V 125kW/168HP ME7.1
Serienleistung170 CV / 125 kW
Hubraum2300 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1/3
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Optimaler Zündwinkel
  • Berechnung Motor Sollfüllung
  • Kennfeld Lambda-Motor-Beschreibung im Nachstart
  • Abgastemperatur
  • Einspritzung für IAT-Sensor
  • Lambda-Anreicherung für Bauteileschutz
  • Drehzahlbegrenzer 2
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Optimales Motormoment
  • Offset-Toleranz in Abhängigkeit vom zulässigen Moment
  • Leistung Drehmoment Begrenzer
  • Zulässiges Moment aus der Pedalstellung in der Funktion überwach
  • Fahrerwunsch drehmoment
  • Drosselklappen-Sollwinkel
  • Pulsationkennfeld Variables SaugRohr

Firmware-Kennungen (3)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612074801037362221 1.21.010066906032AP 0002 BOSCH ME7.1/3
02612074801037363058 1.21.006066906032AP 0003 BOSCH ME7.1/3
02612086961037370691 1.21.005066906032BF 5981 BOSCH ME7.1/3

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.