VOLKSWAGEN BORA A5 2.5L 20V 125kW/168HP ME7.1.1

Steuergerät BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina aspirato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN BORA A5 2.5L 20V 125kW/168HP ME7.1.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 27 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellBORA A5
Motor2.5L 20V 125kW/168HP ME7.1.1
Serienleistung170 CV / 125 kW
Hubraum2500 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Optimaler Zündwinkel
  • Berechnung Motor Sollfüllung
  • Kennfeld Lambda-Motor-Beschreibung im Nachstart
  • Abgastemperatur
  • Einspritzung Teillast
  • Drehzahl-/Geschwindigkeitsbegrenzer
  • Lambda-Anreicherung für Bauteileschutz
  • Drehzahlbegrenzer 2
  • Drehzahlbegrenzer 3
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Geschwindigkeitsbegrenzung
  • Berechnung Massenstrom über Drosselklappe
  • Krümmerabsolutdruck Verzögerung
  • Neben Luftmengenmesser
  • Optimales Motormoment
  • Fahrerwunsch drehmoment
  • Drosselklappen-Sollwinkel

Firmware-Kennungen (27)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612011271037383585 1.84.00807K906032Q 9650 BOSCH ME7.1.1
02612011331037383547 1.84.00407K906032AB 9655 BOSCH ME7.1.1
02612012881037384217 1.42.00307K906032AQ 9685 BOSCH ME7.1.1
02612012901037378537 1.42.00707K906032AN 6738 BOSCH ME7.1.1
02612012911037379579 1.42.00807K906032AR 6747 BOSCH ME7.1.1
02612015021037381617 1.42.00807K906032BF 0601 BOSCH ME7.1.1
02612015031037382156 1.42.00407K906032BE 0601 BOSCH ME7.1.1
02612015041037383980 1.42.00607K906032BF 0603 BOSCH ME7.1.1
02612015041037383980 1.42.01107K906032BC 0603 BOSCH ME7.1.1
02612016781037390702 1.84.01307K906032BL 0711 BOSCH ME7.1.1
02612016791037390701 1.84.01607K906032BM 0711 BOSCH ME7.1.1
02612017391037396718 1.84.01307K906032BH 3071 BOSCH ME7.1.1
02612017401037394306 1.84.00407K906032BJ 2437 BOSCH ME7.1.1
02612017421037396717 1.84.00307K906032BG 3070 BOSCH ME7.1.1
02612017421037390447 1.84.01007K906032BG 1565 BOSCH ME7.1.1
02612085411037374812 1.42.00406A906032QC 6605 BOSCH ME7.1.1
02612085531037376025 1.42.01306A906032QE 6656 BOSCH ME7.1.1
02612085531037374002 1.42.01106A906032QE 6570 BOSCH ME7.1.1
02612085531037374813 1.42.01006A906032QE 6607 BOSCH ME7.1.1
02612085541037376024 1.42.01006A906032QF 6657 BOSCH ME7.1.1
02612085541037374816 1.42.00806A906032QF 6608 BOSCH ME7.1.1
02612085541037382588 1.42.01206A906032QF 9425 BOSCH ME7.1.1
02612088571037384443 1.42.00407K906032H 0611 BOSCH ME7.1.1
02612088571037374829 1.42.00807K906032H 0403 BOSCH ME7.1.1
02612088581037384440 1.42.00507K906032J 0611 BOSCH ME7.1.1
02612088581037374828 1.42.01007K906032J 0403 BOSCH ME7.1.1
02612089891037376251 1.42.00707K906032M 6697 BOSCH ME7.1.1

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata