VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

Steuergerät BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 9 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellBORA A4
Motor2.8L VR6 8V 150kW/201HP ME7.1/7.1.1
Serienleistung204 CV / 15 kW
Hubraum2800 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Lambda-Anreicherung für Bauteileschutz
  • Klopfsensor Begrenzer
  • Luftmassenfluss

Firmware-Kennungen (9)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612073461037366130 1.21.011022906032BL 0011 BOSCH ME7.1.1
02612073471037362580 1.21.011022906032BJ 0002 BOSCH ME7.1.1
02612078811037361454 1.21.013022906032CS 0004 BOSCH ME7.1.1
02612078821037361444 1.21.009022906032CR 0004 BOSCH ME7.1.1
02612078831037363435 1.21.004022906032AD 0001 BOSCH ME7.1.1
02612064861037352424 1.21.014021906018M V05 BOSCH ME7.1/1
02612066181037352480 1.21.015021906018Q V002 BOSCH ME7.1/1
02612068141037360624 1.21.0110219060018R 0004 BOSCH ME7.1/1
02612047391037350063 1.21.022021906018B V06 BOSCH ME7.1/5

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!