MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

Steuergerät BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

Steuergeräte-DatenbankMERCEDES › MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 4 Firmware-Versionen

Fahrzeugdaten

MarkeMERCEDES
ModellS CLASS W140
MotorS300 3.0L TD 130kW/175HP
Serienleistung177 CV / 13 kW
Hubraum3000 cc
KraftstoffDiesel sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellEDC1.4
Speicher / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Verfügbare Tuning-Optionen:

  • Einspritzung für Ladedruck Sensor 1
  • Ladedruck
  • Drehmomentbegrenzer

Firmware-Kennungen (4)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
0281001624/6251037357419/420 1.01.008 BOSCH EDC1.4
0281001624/6251037357419/420 1.01.006 BOSCH EDC1.4
0.280.001.4552.287.358.434 / 435 1.00.019 BOSCH MOTRONIC
02810016241037357710/1 16bit 1.01.011 BOSCH MOTRONIC EDC

Steuergerät-Hinweise

Eprom PLCC 27C010 x 2 to read with PD32. Use autoswitching KEY520 modified in KEY 540. Modify injection map adding no more than 2 numbers only over 2500 rpm and 44% load, to avoid idle problems. In the function "New file for eprom" choose KEY520 and program the modified file on a 27C040.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY. To read this EPROM with the EMP20/21 programmer you need PD32 adapters.