HYUNDAI MATRIX 1.6L 16V 76kW/102HP ME7 KEFICO

Steuergerät BOSCH ME7 · 103 CV (76 kW) · 1600 cc · Benzina aspirato

Steuergeräte-DatenbankHYUNDAI › HYUNDAI MATRIX 1.6L 16V 76kW/102HP ME7 KEFICO

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 3 Firmware-Versionen

Fahrzeugdaten

MarkeHYUNDAI
ModellMATRIX
Motor1.6L 16V 76kW/102HP ME7 KEFICO
Serienleistung103 CV / 76 kW
Hubraum1600 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7
Speicher / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Luftmassenfluss

Firmware-Kennungen (3)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
9030930183F-A4 1.14.001 BOSCH ME7
9030930518F A0 1.14.003 BOSCH ME7
01234567899003040024 1.14.00339108268570 KEFICO MG7.9

Technische Fahrzeughinweise

OBD befindet sich unter dem Lenkrad, oberhalb der Pedale. Sichtbar oder versteckt durch Plastikabdeckung.

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F400BB. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.