AUDI S5 (8T/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.5

Steuergerät CONTINENTAL-SIEMENS-VDO SIMOS 8.5 · 333 CV (245 kW) · 3000 cc · Benzina sovralimentato

Steuergeräte-DatenbankAUDI › AUDI S5 (8T/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.5

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 10 Firmware-Versionen

Fahrzeugdaten

MarkeAUDI
ModellS5 (8T/B8)
Motor3.0L V6 24V TFSI 245kW/329HP SIMOS8.5
Serienleistung333 CV / 245 kW
Hubraum3000 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerCONTINENTAL-SIEMENS-VDO
ModellSIMOS 8.5
Speicher / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Ladedruckbegrenzer
  • Kraftstoff Hochdruckpumpe
  • Drehmomentbegrenzer 2
  • Drehmomentbegrenzer 3
  • Drehmomentbegrenzer 4
  • Drehmomentbegrenzer 5
  • Drehmomentbegrenzer
  • Drehzahlbegrenzer
  • Drehzahlbegrenzer 2
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Maximale Drehmoment Wert
  • Optimales Motormoment
  • Fahrerwunsch drehmoment

Firmware-Kennungen (10)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
8K5907551D 1.33.0058K5907551D 0001 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551D 1.33.0028K5907551D 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8R0907551C 1.33.0068R0907551C 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551E 1.33.0068K5907551E 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551G 1.34.0048K5907551G 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551D 1.33.0038K5907551D 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8R0907551A 1.33.0078R0907551A 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551D 1.33.0188K5907551D 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551D 1.33.0108K5907551D 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K5907551G 1.34.0068K5907551G 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5

Steuergerät-Hinweise

MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop