AUDI Q5 (8R) 3.0L V6 24V TFSI 200kW/268HP SIMOS8.5

Steuergerät CONTINENTAL-SIEMENS-VDO SIMOS 8.5 · 272 CV (2 kW) · 3000 cc · Benzina sovralimentato

Steuergeräte-DatenbankAUDI › AUDI Q5 (8R) 3.0L V6 24V TFSI 200kW/268HP SIMOS8.5

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 5 Firmware-Versionen

Fahrzeugdaten

MarkeAUDI
ModellQ5 (8R)
Motor3.0L V6 24V TFSI 200kW/268HP SIMOS8.5
Serienleistung272 CV / 2 kW
Hubraum3000 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerCONTINENTAL-SIEMENS-VDO
ModellSIMOS 8.5
Speicher / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Ladedruckbegrenzer
  • Berechnung Motor Sollfüllung
  • Kraftstoff Hochdruckpumpe
  • Drehmomentbegrenzer 2
  • Drehmomentbegrenzer 3
  • Drehmomentbegrenzer 4
  • Drehmomentbegrenzer 5
  • Drehmomentbegrenzer
  • Drehzahlbegrenzer
  • Drehzahlbegrenzer 2
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Maximale Drehmoment Wert
  • Optimales Motormoment
  • Fahrerwunsch drehmoment

Firmware-Kennungen (5)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
8R0907551F 1.34.0058R0907551F 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551A 1.33.0038R0907551A 0001 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8R0907551 1.33.0058R0907551 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8R0907551F 1.34.0038R0907551F 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8R0907551F 1.33.0088R0907551F 0007 CONTINENTAL-SIEMENS-VDO SIMOS 8.5

Steuergerät-Hinweise

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop