ALFA ROMEO GT 2.0L 16V JTS 121kW/163HP MED7.1.1

Steuergerät BOSCH MED7.1.1 · 165 CV (121 kW) · 2000 cc · Benzina aspirato

Steuergeräte-DatenbankALFA ROMEO › ALFA ROMEO GT 2.0L 16V JTS 121kW/163HP MED7.1.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 3 Firmware-Versionen

Fahrzeugdaten

MarkeALFA ROMEO
ModellGT
Motor2.0L 16V JTS 121kW/163HP MED7.1.1
Serienleistung165 CV / 121 kW
Hubraum2000 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellMED7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Luftmassenfluss

Firmware-Kennungen (3)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
0261S010171037367985 1.00.006 BOSCH MED7.1.1
0261S010321037369653 1.00.009 BOSCH MED7.1.1
0261S010331037369643 1.00.002 BOSCH MED7.1.1

Technische Fahrzeughinweise

OBD befindet sich auf der linken Seite der Fahrerseite, unterhalb des Lenkrads hinter dem Schott oder der Klappe bei den Sicherungen.

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop