YAMAHA MOTORCYCLES YZF-R9 900 25->25 88kW

ECU DENSO Bxx-8591A-xx · 120 CV (88 kW) · 900 cc · Benzina aspirato

ECU-databaseYAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES YZF-R9 900 25->25 88kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkYAMAHA MOTORCYCLES
ModelYZF-R9 900
Motor25->25 88kW
Standaard vermogen120 CV / 88 kW
Cilinderinhoud900 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantDENSO
ModelBxx-8591A-xx
Geheugen / EPROMMicro RENESAS core RH850

Beschikbare tuning-opties:

  • AFR full load/WOT
  • AFR for IAP
  • AFR for TPS
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Allowed speed difference between axles - set A
  • Allowed speed difference between axles - set B
  • Allowed speed difference between axles - set C
  • Coil charge time
  • Engine brake
  • Engine idle vs. ECT sensor
  • Rpm threshold fuel cut
  • Rpm threshold fuel cut 2
  • Injection for IAP
  • Injection for TPS
  • RPM Limiter
  • Speed limiter
  • Optimal engine moment
  • Optimal engine moment 2
  • Throttle angle limitation
  • TAMCM
  • Throttle angle management - mode 1
  • TAMM
  • Throttle angle management - mode 3
  • Throttle angle management - mode 4
  • Cooling fan activation

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
126DE440 1.00.005BKN5_126DE440 DENSO Bxx-8591A-xx
126DE480 1.00.022BKN4_126DE480 DENSO Bxx-8591A-xx
126DE000 1.00.018BKN3_126DE000 DENSO Bxx-8591A-xx
126DE100 1.00.008BKNB_126DE100 DENSO Bxx-8591A-xx

ECU-notities

Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 70kW reduced power version file.
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 54kW reduced power version file.