YAMAHA MOTORCYCLES MT-09 (FZ-09) 900 24->25 88kW

ECU DENSO Bxx-8591A-xx · 119 CV (88 kW) · 890 cc · Benzina aspirato

ECU-databaseYAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES MT-09 (FZ-09) 900 24->25 88kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 42 firmwareversies

Voertuiggegevens

MerkYAMAHA MOTORCYCLES
ModelMT-09 (FZ-09) 900
Motor24->25 88kW
Standaard vermogen119 CV / 88 kW
Cilinderinhoud890 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantDENSO
ModelBxx-8591A-xx
Geheugen / EPROMMicro RENESAS core RH850

Beschikbare tuning-opties:

  • AFR full load/WOT
  • AFR for IAP
  • AFR for TPS
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Allowed speed difference between axles - set A
  • Allowed speed difference between axles - set B
  • Allowed speed difference between axles - set C
  • Coil charge time
  • Engine brake
  • Engine idle vs. ECT sensor
  • Rpm threshold fuel cut
  • Rpm threshold fuel cut 2
  • Injection for IAP
  • Injection for TPS
  • RPM Limiter
  • Speed limiter
  • Optimal engine moment
  • Optimal engine moment 2
  • Throttle angle limitation
  • TAMCM
  • Throttle angle management - mode 1
  • TAMM
  • Throttle angle management - mode 3
  • Throttle angle management - mode 4
  • Cooling fan activation

Firmware-identificatoren (42)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
12755081 1.00.009BME2_12755081 DENSO Bxx-8591A-xx
12755181 1.00.009BME4_12755181 DENSO Bxx-8591A-xx
1275D001 1.00.028BMM1_1275D001 DENSO Bxx-8591A-xx
128A3081 1.00.008BRS6_128A3081 DENSO Bxx-8591A-xx
128D6001 1.00.024BSF1_128D6001 DENSO Bxx-8591A-xx
128D4041 1.00.015BSC1_128D4041 DENSO Bxx-8591A-xx
128D6041 1.00.011BRT1_128D6041 DENSO Bxx-8591A-xx
128A3101 1.00.008BRSA_128A3101 DENSO Bxx-8591A-xx
14481040 1.00.017DB12_14481040 DENSO Bxx-8591A-xx
14481000 1.00.010DB11_14481000 DENSO Bxx-8591A-xx
12755141 1.00.007BME5_12755141 DENSO Bxx-8591A-xx
12755041 1.00.007BME3_12755041 DENSO Bxx-8591A-xx
12755180 1.00.008BME4_12755180 DENSO Bxx-8591A-xx
12755100 1.00.018BME9_12755100 DENSO Bxx-8591A-xx
128D4000 1.00.023BSD1_128D4000 DENSO Bxx-8591A-xx
128A3100 1.00.010BRSA_128A3100 DENSO Bxx-8591A-xx
1275D040 1.00.007BMM4_1275D040 DENSO Bxx-8591A-xx
127550C1 1.00.010BME8_127550C1 DENSO Bxx-8591A-xx
1275D041 1.00.007BMM4_1275D041 DENSO Bxx-8591A-xx
1275D181 1.00.008BMM5_1275D181 DENSO Bxx-8591A-xx
1275D141 1.00.007BMM6_1275D141 DENSO Bxx-8591A-xx
1275D0C1 1.00.010BMM9_1275D0C1 DENSO Bxx-8591A-xx
12755140 1.00.008BME5_12755140 DENSO Bxx-8591A-xx
12755001 1.00.029BME1_12755001 DENSO Bxx-8591A-xx
1275D081 1.00.010BMMA_1275D081 DENSO Bxx-8591A-xx
128A3001 1.00.011BRS1_128A3001 DENSO Bxx-8591A-xx
128A30C1 1.00.010BRS9_128A30C1 DENSO Bxx-8591A-xx
128D5040 1.00.010BRU1_128D5040 DENSO Bxx-8591A-xx
128D5041 1.00.013BRU1_128D5041 DENSO Bxx-8591A-xx
128D5000 1.00.010BSE1_128D5000 DENSO Bxx-8591A-xx
128D5001 1.00.015BSE1_128D5001 DENSO Bxx-8591A-xx
1275D000 1.00.015BMM1_1275D000 DENSO Bxx-8591A-xx
12755000 1.00.033BME1_12755000 DENSO Bxx-8591A-xx
128D4001 1.00.031BSD1_128D4001 DENSO Bxx-8591A-xx
128D6040 1.00.012BRT1_128D6040 DENSO Bxx-8591A-xx
128D4040 1.00.011BSC1_128D4040 DENSO Bxx-8591A-xx
128D6000 1.00.015BSF1_128D6000 DENSO Bxx-8591A-xx
12A5E040 1.00.014BYN1_12A5E040 DENSO Bxx-8591A-xx
12A5E000 1.00.011BYN2_12A5E000 DENSO Bxx-8591A-xx
12755040 1.00.009BME3_12755040 DENSO Bxx-8591A-xx
128A3000 1.00.007BRS1_128A3000 DENSO Bxx-8591A-xx
12755101 1.00.019BME9_12755101 DENSO Bxx-8591A-xx

Technische voertuignotities

ECU located under/near the tank. Difficulty: medium/high.
OBD placed under the saddle

ECU-notities

Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 70kW reduced power version file.
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 54kW reduced power version file.