VOLVO S70 2.4L 20V TURBO 142kW/190HP ME7

ECU BOSCH ME7.0 · 193 CV (142 kW) · 2400 cc · Benzina sovralimentato

ECU-databaseVOLVO › VOLVO S70 2.4L 20V TURBO 142kW/190HP ME7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkVOLVO
ModelS70
Motor2.4L 20V TURBO 142kW/190HP ME7
Standaard vermogen193 CV / 142 kW
Cilinderinhoud2400 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.0
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612045591037359462 1.46.00410n0MHde.a2l BOSCH ME7.0

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!