VOLVO TRUCK VN 385 12.1L 287kW/385HP LUCAS

ECU LUCAS PLCC 28HC256 · 390 CV (287 kW) · 12100 cc · Diesel sovralimentato

ECU-databaseVOLVO TRUCK › VOLVO TRUCK VN 385 12.1L 287kW/385HP LUCAS

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkVOLVO TRUCK
ModelVN
Motor385 12.1L 287kW/385HP LUCAS
Standaard vermogen390 CV / 287 kW
Cilinderinhoud12100 cc
BrandstofDiesel sovralimentato
VoertuigtypeTir

ECU

FabrikantLUCAS
ModelPLCC 28HC256
Geheugen / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Beschikbare tuning-opties:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
08170700XXXX3059 1.55.006 LUCAS PLCC 28HC256

ECU-notities

Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.