VOLVO TRUCK FL MK I 180 5.5L 132kW/178HP LUCAS

ECU LUCAS PLCC 28HC256 · 180 CV (132 kW) · 5500 cc · Diesel sovralimentato

ECU-databaseVOLVO TRUCK › VOLVO TRUCK FL MK I 180 5.5L 132kW/178HP LUCAS

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkVOLVO TRUCK
ModelFL MK I
Motor180 5.5L 132kW/178HP LUCAS
Standaard vermogen180 CV / 132 kW
Cilinderinhoud5500 cc
BrandstofDiesel sovralimentato
VoertuigtypeTir

ECU

FabrikantLUCAS
ModelPLCC 28HC256
Geheugen / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Beschikbare tuning-opties:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
03161965XXXX3074 1.55.002 LUCAS PLCC 28HC256
03161965XXXX1947 1.55.112 LUCAS PLCC 28HC256
08192397XXXX3670 1.55.002 LUCAS PLCC 28HC256
08192397XXXX1944 1.55.005 LUCAS PLCC 28HC256
20412508XXXX1947 1.55.004 LUCAS PLCC 28HC256
20412508XXXX1944 1.55.111 LUCAS PLCC 28HC256
20412508XXXX3673 1.55.002 LUCAS PLCC 28HC256
20412508XXXX3783 1.55.005 LUCAS PLCC 28HC256
20577133XXXX3074 1.55.002 LUCAS PLCC 28HC256

ECU-notities

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.