VOLVO PENTA INDUSTRIAL POWER GENERATION ENGINES 520 12L 383kW/520HP PLCC 28HC256

ECU LUCAS PLCC 28HC256 · 521 CV (383 kW) · 12000 cc · Diesel sovralimentato

ECU-databaseVOLVO PENTA INDUSTRIAL › VOLVO PENTA INDUSTRIAL POWER GENERATION ENGINES 520 12L 383kW/520HP PLCC 28HC256

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkVOLVO PENTA INDUSTRIAL
ModelPOWER GENERATION ENGINES
Motor520 12L 383kW/520HP PLCC 28HC256
Standaard vermogen521 CV / 383 kW
Cilinderinhoud12000 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantLUCAS
ModelPLCC 28HC256
Geheugen / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Beschikbare tuning-opties:

  • Injection period
  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
20582963XXXX4214 1.55.006 LUCAS PLCC 28HC256

ECU-notities

Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.